TRJ Posted January 19, 2018 at 11:12 PM Share Posted January 19, 2018 at 11:12 PM https://www.stonercnc.com/product-page/grey-black-13 Anybody ever check these guys out? Reviews are sparse, but I really like the looks of these G10 grips. I'm removing the right side lever of the ambi safety because it pinches my hand. This company makes grips that will fill in the hole where the lever used to be so it doesn't look odd, and it helps retain the sear pin that used to be blocked by the safety lever when firing. Link to comment Share on other sites More sharing options...
dennyg Posted January 19, 2018 at 11:21 PM Share Posted January 19, 2018 at 11:21 PM Got a pair for my Kimble Raptor. Very nice, I like them. Link to comment Share on other sites More sharing options...
luckydawg13 Posted January 20, 2018 at 01:11 AM Share Posted January 20, 2018 at 01:11 AM I dont know about the stoner grips but i do have a few sets from VZ that i like a lot https://vzgrips.com/ Link to comment Share on other sites More sharing options...
tkroenlein Posted January 20, 2018 at 02:41 AM Share Posted January 20, 2018 at 02:41 AM You putting these on a Sig? What retains the rest of the safety assembly with the right side lever removed? Sent from my iPhone using Tapatalk Link to comment Share on other sites More sharing options...
TRJ Posted January 20, 2018 at 02:53 AM Author Share Posted January 20, 2018 at 02:53 AM The 238 and 938 use the same trigger pin and safety assemblies. The 238 is left side only, so using 238 parts on a 938 acts as an ambi delete. Link to comment Share on other sites More sharing options...
tkroenlein Posted January 20, 2018 at 03:42 AM Share Posted January 20, 2018 at 03:42 AM The 238 and 938 use the same trigger pin and safety assemblies. The 238 is left side only, so using 238 parts on a 938 acts as an ambi delete.Ya don't say. Sounds like an easy fix. Link to comment Share on other sites More sharing options...
TRJ Posted January 20, 2018 at 03:47 AM Author Share Posted January 20, 2018 at 03:47 AM The 238 and 938 use the same trigger pin and safety assemblies. The 238 is left side only, so using 238 parts on a 938 acts as an ambi delete.Ya don't say. Sounds like an easy fix.5 minutes blindfolded. Link to comment Share on other sites More sharing options...
luckydawg13 Posted January 21, 2018 at 01:48 PM Share Posted January 21, 2018 at 01:48 PM Just asking but why would you want to take the ambi safety off one day you might need it Link to comment Share on other sites More sharing options...
TRJ Posted January 21, 2018 at 05:05 PM Author Share Posted January 21, 2018 at 05:05 PM Pinches my hand. Link to comment Share on other sites More sharing options...
TRJ Posted January 25, 2018 at 04:48 PM Author Share Posted January 25, 2018 at 04:48 PM Tracking says my grips are coming today. Stuck at office. I look like this... Link to comment Share on other sites More sharing options...
TRJ Posted January 29, 2018 at 11:51 AM Author Share Posted January 29, 2018 at 11:51 AM Grips installed. Not 100% satisfied only due to the left side panel being drilled a hair too deep for the mounting screws which caused a wobble even though screws bottomed out. I found some fiber washers in my spare hardware stash, sanded them to fit the holes and fixed the problem. Also had to sand the ridges flat around the safety so I could effectively swipe that down. Looks great now. Would have preferred not having to fix the little stuff first though. Link to comment Share on other sites More sharing options...
Recommended Posts
Archived
This topic is now archived and is closed to further replies.